SNCR脱硝技术在液态排渣煤粉工业锅炉中的应用

为了检验选择性非催化还原（SNCR）脱硝技术在高效低NO_x液态排渣煤粉工业锅炉中的应用效果，本文在一台8.4MW有机热载体锅炉炉膛内开展了SNCR脱硝技术工业化试验研究。选用尿素作为还原剂，搭建了工业化SNCR脱硝试验平台。在10%、15%、20%三种浓度尿素溶液下进行了不同尿素溶液喷射量、不同氧含量、不同锅炉负荷下的SNCR脱硝试验研究。试验结果表明，提出的“低NO_x燃烧+SNCR脱硝”耦合技术方案是可行的，SNCR脱硝效率在80%以上，完全能够达到烟气中NO_x低于50mg/m³的超低排放要求。     

某含锌锡多金属硫化矿石锌浮选试验研究

某含锌锡多金属硫化矿石Zn、Sn、Fe、S含量分别为6.04%、1.05%、29.33%、19.08%，锌主要以铁闪锌矿、闪锌矿的形式存在，锡主要以锡石的形式存在，铁主要以黄铁矿、磁黄铁矿等形式存在，其中的金属矿物共生关系密切，相互包裹现象普遍。为确保不影响后续选锡，对锌浮选流程进行了试验研究。结果表明：矿石在磨矿细度为-0.074 mm占80%的情况下，采用预先脱硫—锌硫混浮再分离流程处理，在选择硫酸铜为锌矿物活化剂、丁基黄药为捕收剂、松醇油为起泡剂、石灰为黄铁矿抑制剂的情况下，经1段脱硫、2粗1扫锌硫混浮、1粗2精锌硫分离，锌硫分离精选尾矿与锌硫混浮扫选精矿2次精选后锌硫分离，最终获得锌精矿Zn品位47.06%、回收率90.76%，试验指标良好。     

某高硫铜硫矿工艺矿物学研究

研究了某高硫铜硫矿的工艺矿物学。结果表明,原矿中铜品位为2.85%,硫品位为24.32%,金含量为0.48g/t,铜、硫、金是主要回收的元素。原矿中的金属矿物有黄铜矿、黄铁矿、蓝辉铜矿。目的矿物黄铜矿和黄铁矿的嵌布粒度差异较大,且铜矿单体解离度相对较差。在选择工艺流程时应该注重氧化铜矿物的回收,同时要选择合适的磨矿细度,保证目的矿物单体解离。     

Automated classification of simulated wind field patterns from multiphysics ensemble forecasts

In this study, we have proposed an automated classification approach to identify meaningful patterns in wind field data. Utilizing an extensive simulated wind database, we have demonstrated that the proposed approach can identify low‐level jets, near‐uniform profiles, and other patterns in a reliable manner. We have studied the dependence of these wind profile patterns on locations (eg, offshore vs onshore), seasons, and diurnal cycles. Furthermore, we have found that the probability distributions of some of the patterns depend on the underlying planetary boundary layer schemes in a significant way. The future potential of the proposed approach in wind resource assessment and, more generally, in mesoscale model parameterization improvement is touched upon in this paper.     

Use of nets treated with food-grade coatings on dry-cured ham to control Tyrophagus putrescentiae infestations without impacting sensory properties

Dry-cured hams may become infested with the ham mite Tyrophagus putrescentiae during aging. Food-grade coatings have been developed to control mite infestations as a potential alternative to replace methyl bromide, but dipping or spraying these coatings requires additional labor and processing steps. Nets composed of polyester, a polyester/cotton blend and cotton were infused with coatings that consisted of propylene glycol, and either propylene glycol alginate and carrageenan or xanthan gum. Results indicated that the polyester/cotton blend and cotton nets that contained propylene glycol were effective at controlling mite infestations in assays with ham cubes covered in nets. The polyester nets slowed mite growth but were not effective at controlling mite reproduction due to low absorbance of the coatings. Polyester/cotton blend nets treated with coatings on whole hams were not different from control hams with respect to flavor, texture and moistness. Mite infestation tests on whole hams indicated that coated nets with greater stitch densities were effective at controlling mite growth. Future research will include the optimization of coating formulations and scaled-up testing in dry-cured ham plants.     

纳米氧化锌/低密度聚乙烯膜中锌向食品的迁移研究

目的研究纳米氧化锌/低密度聚乙烯膜(low density polyethylene film,LDPE)中锌(Zn)向食品的迁移行为,探究其迁移规律。方法选取2种食品模拟物(3%乙酸及超纯水)及真实食品(食用白醋及瓶装水),在3种不同实验温度下(70、40及20℃),研究锌向食品模拟物的迁移规律。采用扫描电子显微镜(scanning electron microscope,SEM)和原子力显微镜(atomic force microscope,AFM)表征纳米ZnO/LDPE膜的表面形貌。结果锌向酸性模拟物中的迁移率远远大于水性模拟物中的迁移率,其中锌向酸性模拟物中的最大迁移率分别为22.7%,20.3%及18.6%(ZL-1,ZL-2及ZL-2#),向水性模拟物中的最大迁移率分别为9.9%,5.7%及4.9%(ZL-1,ZL-2及ZL-2#);锌向酸性食品的迁移量(1.59~5.03 mg/g)同样高于向水性食品的迁移量(2.98~24.60μg/g);随着纳米ZnO的初始含量变大迁移率变小;而偶联剂的加入对锌的迁移有一定的抑制作用。随着纳米ZnO浓度的增加,在薄膜中观察到纳米ZnO的不规则形貌。结论纳米ZnO/LDPE膜不适合在高温下包装食物,且其在酸性食品中的安全隐患高于水性食品。     

单一低渗透突出煤层水力冲孔工艺优化应用分析

为了有效提高单一低渗透突出煤层的瓦斯抽采效率，以高压水射流冲击理论为指导，针对平煤股份八矿己组突出煤层特征建立数值模型，模拟分析水力冲孔应力分布规律，通过现场实测分析冲孔有效影响范围，进一步优化设计冲孔参数、指导现场施工。现场应用表明，水力冲孔是一种行之有效的方法，对单一低渗透突出煤层实施水力冲孔卸压增透、提高瓦斯抽采效果具有重要意义。     

Influence analysis of bracket set on seismic performance of steel eave columns in Chinese traditional style buildings

This paper presents influence analysis of bracket set on seismic performance of steel eave columns in Chinese traditional style buildings. Eight 1/1.5‐scale steel eave columns were constructed and tested under low cyclic reversed loading, including 4 specimens with bracket set and 4 specimens without bracket set. Based on the analysis of the strain of the specimens, the failure modes of the specimens were obtained. In addition, the hysteresis loops, skeleton curves, degradations of stiffness and strength, ductility, and dissipation capacities of the specimens were analyzed. Bracket set changed the force transfer mechanisms and failure modes of the specimens and had a significant influence on the seismic performance of the specimens. Compared with the specimens without bracket set, the yielded and ultimate bearing capacities of the specimens with bracket set improved by 30.7% and 24.0%, respectively. And also, the stiffness of the specimens with bracket set at the yielded and ultimate points increased by 52.8% and 135.6%. The dissipation capacities of the specimens with bracket set were 2.12 times those of the specimens without bracket set at yielded load. However, the ductility of the specimens with bracket set slightly decreased by 8.5%. It was shown that the seismic performance of the specimens with bracket set was better than that of the specimens without bracket set. The work in this paper provides a basis for further theoretical study on the seismic performance of steel eave columns in Chinese traditional style buildings.     

三塘湖盆地中—下侏罗统煤层甲烷风化带划分

以三塘湖盆地中、低煤阶煤层含气量和主要气体成分为基础,结合盆地构造、沉积及水文地质特征,对汉水泉凹陷和条湖凹陷煤层甲烷风化带进行了划分,并对库木苏凹陷、马朗凹陷、淖毛湖凹陷和苏鲁克凹陷煤层甲烷风化带进行了预测。结果表明,三塘湖盆地甲烷风化带深度为400~1000 m.由于受东北冲断隆起带的影响,三塘湖盆地北部甲烷风化带浅于南部。沉积方面,盆地东部淖毛湖凹陷、马朗凹陷和条湖凹陷深湖—半深湖和辫状河三角洲成煤环境优于盆地西部汉水泉凹陷和库木苏凹陷扇三角洲成煤环境,盆地东部甲烷风化带普遍浅于西部;水文地质方面,条湖凹陷和马朗凹陷中开启性局部滞留水文地质单元形成的甲烷风化带浅于其他凹陷封闭性弱径流水文地质单元的甲烷风化带。初步预测马朗凹陷北部为下一步煤层气勘探开发的优势区块,条湖凹陷北部为下一步煤系气勘探开发的优势区块。     

苛化提纯盐湖锂矿回收含氟碳酸锂的研究

主要论述了一种提纯盐湖锂矿和回收含氟碳酸锂的方法。工艺流程：盐湖锂矿（含氟碳酸锂）通过一次水洗涤除去其中所含的大部分可溶性杂质后,按一定配比将其投入到石灰乳料浆中加热到90~95 ℃反应4 h,过滤后得到氢氧化锂溶液,将氢氧化锂溶液在100~120 ℃下进行加压浓缩4 h精制得到钙镁离子和硅含量较低的氢氧化锂溶液;向精制后的氢氧化锂溶液中通入食品级二氧化碳沉锂得到工业级碳酸锂,或继续浓缩制备氢氧化锂;用以上工艺生产得到的工业级碳酸锂通过二次碳化、阳离子交换树脂除去钙镁离子、重结晶可得到硅含量为10×10^-6以内的高纯碳酸锂,或浓缩得到钙含量为5×10^-6、镁含量为2×10^-6以内的单水氢氧化锂。